Lead Repair/Extension Kit
This kit allows you to extend the regular 10' mat cable by up to an additional 10'. The kit consists of 10' of braided wire with connectors.
MatSense Pro
Details
MatSense Pro is a device which signals any fault made in the wiring during installation.
Ramp
This shower ramp is made from polystrene (PS40) and is designed to work with the KERDI shower system. Its dimensions are 48 x 15-7/8 (run). The thickness (rise) is from 1/4" to 1-1/2"
REMA
This set of four (4) magnets allows you to construct a removable access panel from tile. Ideal for Jacuzzis and soaker tubs.
Shower curb 48"
The Schluter-KERDI-SHOWER-SC is a polystyrene (PS 40) shower curb specifically designed to integrate with the KERDI-SHOWER-ST, KERDI and KERDI-DRAIN
Shower curb cut-to-size
The Schluter-KERDI-SHOWER-SC is a polystyrene (PS 40) shower curb specifically designed to integrate with the KERDI-SHOWER-ST, KERDI and KERDI-DRAIN. This item is sold per lineal foot. Please select this item when you don't need a complete four foot curb (SC-122) or need additional quantities smaller than four feet. If, for example, you order three one-foot sections, you will be shipped one continuous curb of three foot length, instead of three individual curbs of one foot.
Shower tray 32" x 60" (off-set)
*Also known as Tray #3* The Schluter-KERDI-SHOWER-ST is a pre-sloped shower tray made of lightweight expanded polystyrene (PS 40) for constructing mortar-free shower receptors. It is specifically designed to integrate with Schluter-KERDI-SHOWER-SC, KERDI and KERDI-DRAIN. The tray perimeter is 1.5" high. The drain hole is off-set 10" from the short side (for the tray with the centered drain hole, choose shower tray 32" x 60" - regular).
Shower tray 32" x 60" (regular)
The Schluter-KERDI-SHOWER-ST is a pre-sloped shower tray made of lightweight expanded polystyrene (PS 40) for constructing mortar-free shower receptors. It is specifically designed to integrate with Schluter-KERDI-SHOWER-SC, KERDI and KERDI-DRAIN. The tray perimeter is 1.75" high. The drain hole is centered (for the tray with the off-set drain hole, choose shower tray 32 x 60 off-set).
Shower tray 48" x 48"
The Schluter-KERDI-SHOWER-ST is a pre-sloped shower tray made of lightweight expanded polystyrene (PS 40) for constructing mortar-free shower receptors. It is specifically designed to integrate with Schluter-KERDI-SHOWER-SC, KERDI and KERDI-DRAIN. The perimeter of the tray is 1.5" in height.
Shower tray 72" x 72"
Soap dish
This soap dish is of the flat-back variety, which allows it to be directly attached voer tile, instead of replacing it. It is slightly sloped to improve water removal.
SOLO thermostat
*Now available!*This fully programmable thermostat is a revolutionary dual-voltage "all-in-one" thermostat exclusive to Nuheat. Unique features include network capabilities and compatibility with exterior temperature and humidity sensors (sold separately). Designed for electric floor heating systems Dual voltage compatibility (120V or 240V) For tile, stone and laminate/engineered wood floors Programmable 7-day settings Full menu screen for easy programming ENERGY STAR qualified>br> Floor sensing and ambient air sensing Backlit screen Built-in Class A GFCI 3-year limited manufacturer's warranty
Toilet paper holder
This toilet paper holder is of the flat-back variety and call be installed directly on a wall surface. It measures 4.75" x 6.5" and holds a standard or double-sized roll.
TROBA-PLUS
135 square foot roll. TROBA-PLUS is a durable sub-surface drainage system that permits water to drain off freely and reliably.
TROBA-RO
215 square foot roll. TROBA-RO is a reliable and durable sub-surface drainage system for use over horizontal waterproofing layers.
New products
DITRA-XL is here!
Download the newest Schluter installation videos and 'docs'
Click here!
